Both dry dust and wet mist can be collected using the same design.
Water does not influence the life nor Cause screen clogging problems.
Low pressure loss results in low Operating cost
Thanks to the use of inertia de-dusting and impact separation principles , the pressure loss is extremely small. Not only the initial cost but also the operating cost of the mesh screen dust collecting system are much lower compared with the conventional dust collectors of the same capacity.
Suitable for high temperature flue gas and corrosive gas
Aluminium alloys or stainless steel superior in Heat resistance and corrosion resistance is used to ensure long life under high Temperature or corrosive atmosphere.
Simple maintenance
Removal of dust from the mesh screen is done using vibrators or water scrubbing.
For this reason , no change of mesh screens are required.
High dust collection efficiency
The patent protected 45o angle honeycomb design enables high collection efficiency in spite of relatively large hole size . By selecting the best gas velocity through the mesh screen, very fine dust and mist can be collected with the mesh screen with the same hole size.
